Español
日本語
Generic SFP-GE-BX10U-3155-I Compatible Industrial 1.25Gbps BIDI SFP 1000BASE-BX10 TX1310nm/RX1550nm 10km SMF Simplex LC DDM/DOM Optical Transceiver Module
$17.7
Compatible Brand
Generic Alcatel-Lucent D-Link Edimax Juniper Networks Planet
Generic Compatible 1G BIDI SFP Industrial Transceiver Module Series
SFP-GE-BX10U-3149-I : 10km SFP-GE-BX10D-4931-I : 10km SFP-GE-BX20U-3149-I : 20km SFP-GE-BX20D-4931-I : 20km SFP-GE-BX40U-3149-I : 40km SFP-GE-BX40D-4931-I : 40km SFP-GE-BX80U-4955-I : 80km SFP-GE-BX80D-5549-I : 80km SFP-GE-BX120U-4955-I : 120km SFP-GE-BX120D-5549-I : 120km SFP-GE-BX10U-3155-I : 10km SFP-GE-BX10D-5531-I : 10km SFP-GE-BX20U-3155-I : 20km SFP-GE-BX20D-5531-I : 20km SFP-GE-BX40U-3155-I : 40km SFP-GE-BX40D-5531-I : 40km SFP-GE-BX80U-4957-I : 80km SFP-GE-BX80D-5749-I : 80km
BIDI transceiver module must be used in pair with its counterpart module
SFP-GE-BX10D-5531-I :Fiber patch cord for direct connection between transceiver modules
Simplex LC Single Mode OS2 Fiber Patch CordGeneric SFP-GE-BX10U-3155-I Compatible Industrial 1.25Gbps BIDI SFP 1000BASE-BX10 TX1310nm/RX1550nm 10km SMF Simplex LC DDM/DOM Optical Transceiver Module
Dawnray’s SFP-GE-BX10U-3155-I optical transceiver is an industrial single fiber bidirection 1000Mbps Small Form-factor Pluggable SFP BIDI module for use in 1000BASE Ethernet network. SFP BX10U-3155 provides 1Gb/s throughput up to 10km over single-mode fiber (SMF) using 1310nm in transmitter side and 1550nm in receiver side. This transceiver is fully compliant with SFP Multi-Source Agreement (MSA), IEEE 802.3 1000BASE-BX10 and SERDES standard. Its electrical interface is MSA compliant 20-pin edge type connector and the optical interface is Simplex LC connector. The full-duplex SFP transceiver features highly reliable FP transmitter and PIN photo detector to offer high performance interconnection at 1.25Gbps data rate. Industrial modules extend the operating temperature range. Built-in Digital Diagnostic Monitoring/Digital Optical Monitoring (DDM/DOM) support is present for real-time performance monitoring via 2-wire (TWI/I2C) interface. Our modules are factory pre-programmed for compatibility, perform alternatively to generic/MSA transceivers.
Feature
- Hot pluggable SFP fiber optic transceiver module
- Data rate up to 1.25Gbps
- TX1310nm/RX1550nm FP transmitter
- PIN photo receiver
- Simplex LC optical connector
- Link distance up to SMF 10km
- Built-in digital diagnostic via 2-wire interface
- Single 3.3V power supply voltage
- Power consumption < 0.6W
- Ambient temperature range -40 to 85°C for industrial application
- Compliant with INF-8074i, SFF-8472
- Compliant with IEEE 802.3 1000BASE-BX10
- Compliant with RoHS, REACH, CE, FCC standards
Application
- Gigabit Ethernet
- Enterprise
- Campus
- Data Center
Specification
| Part Number | SFP-GE-BX10U-3155-I | Form Factor | SFP |
| Max Data Rate | 1.25Gbps | Max Distance | 10km (6.2 miles) |
| Wavelength | TX1310nm/RX1550nm | Connector | Simplex LC |
| DDM/DOM | Support | Media | SMF |
| Transmitter Type | FP | Receiver Type | PIN |
| Transmitter Power | -9 to -3dBm | Receiver Sensitivity | < -23dBm |
| Extinction Ratio | 9dB | Receiver Overload | -3dBm |
| Modulation Format | NRZ | Power Budget | 14dB |
| Power Consumption | 0.6W | Industrial Temperature Range | -40 to 85°C (-40 to 185°F) |
| Weight | 0.03 kg |
|---|---|
| Dimensions | 12.5 × 7 × 3.5 cm |
