Filter

Cisco QSFP-100G-4W40-I Compatible Industrial 100Gbps QSFP28 100GBASE-ER4 1310nm 40km SMF Duplex LC DDM/DOM Optical Transceiver Module

Cisco QSFP-100G-4W40-I Compatible Industrial 100Gbps QSFP28 100GBASE-ER4 1310nm 40km SMF Duplex LC DDM/DOM Optical Transceiver Module

$1,998.0

Quantity	Discount (%)	USD
1 - 9	—	$1,998.0
10 - 19	0.84 %	$1,981.3
20 - 49	1.67 %	$1,964.6
50 - 99	2.78 %	$1,942.5
100 - 199	3.61 %	$1,925.8
200 - 499	4.45 %	$1,909.1
500 - 999	5.55 %	$1,887.1
1,000 - 1,999	6.39 %	$1,870.4
2,000 - 4,999	7.22 %	$1,853.7
5,000 - 9,999	8.33 %	$1,831.6
10,000+	9.16 %	$1,814.9

SKU: CISCO-QSFP-100G-4W40-I Categories: 100G, Cisco Compatible, Industrial Transceiver, Interconnection, QSFP28

Description
Additional information

Cisco QSFP-100G-4W40-I Compatible Industrial 100Gbps QSFP28 100GBASE-ER4 1310nm 40km SMF Duplex LC DDM/DOM Optical Transceiver Module

Cisco QSFP-100G-4W40-I compatible optical transceiver is an industrial parallel 100Gbps Quad Small Form-factor Pluggable QSFP28 module for use in 100GBASE Ethernet network. QSFP28 ER4 provides 103.1Gb/s throughput up to 25km-40km over single-mode fiber (SMF) with host FEC using 1295.56nm, 1300.05nm, 1304.58nm, 1309.14nm wavelength. This transceiver is fully compliant with QSFP28 Multi-Source Agreement (MSA), IEEE 802.3ba 100GBASE-ER4 and CAUI-4 standard. Its electrical interface is MSA compliant 38-pin edge type connector and the optical interface is Duplex LC connector. The full-duplex QSFP28 transceiver implements 4 independent 25.78125Gbps transmit and receive signal channels in each wavelength for an aggregate 103.125Gbps data rate. Industrial modules extend the operating temperature range. Built-in Digital Diagnostic Monitoring/Digital Optical Monitoring (DDM/DOM) support is present for real-time performance monitoring via 2-wire (TWI/I2C) interface. Our modules are factory pre-programmed for compatibility, perform alternatively to genuine Cisco QSFP-100G-4W40-I transceivers.

Feature

Equivalent to Cisco QSFP-100G-4W40-I in function
Hot pluggable QSFP28 fiber optic transceiver module
Aggregate data rate up to 103.125Gbps
4 channels 1310nm LAN-WDM EML transmitter
4 channels APD photo receiver
Duplex LC optical connector
Link distance up to SMF 40km with host FEC
Built-in digital diagnostic via 2-wire interface
Single 3.3V power supply voltage
Power consumption < 4.5W
Ambient temperature range -40 to 85°C for industrial application
Compliant with SFF-8665, SFF-8661, SFF-8679, SFF-8636
Compliant with IEEE 802.3ba 100GBASE-ER4
Compliant with RoHS, REACH, CE, FCC standards

Application

100G Ethernet
Data Center

Specification

Cisco Compatible P/N	QSFP-100G-4W40-I	Form Factor	QSFP28
Max Data Rate	103.125Gbps	Max Distance	25km-40km (15.5 miles-24.9 miles)
Wavelength	1295.56nm, 1300.05nm, 1304.58nm, 1309.14nm	Connector	Duplex LC
DDM/DOM	Support	Media	SMF
Transmitter Type	4x LAN-WDM EML	Receiver Type	APD
Transmitter Power	-2.9 to 4.5dBm	Receiver Sensitivity	< -20.9dBm
Extinction Ratio	4dB	Receiver Overload	-4.9dBm
Transmit and Dispersion Penalty	2.5dB	Power Budget	18dB
OE Packaging	Box Packaging	Signal Conditioner	Retimer for TX and RX
Modulation Format	NRZ	Host FEC	Support
Power Consumption	4.5W	Industrial Temperature Range	-40 to 85°C (-40 to 185°F)