Cisco GLC-FE-T-I Compatible Industrial 125Mbps SFP 100BASE-TX 100m CAT6/CAT6a RJ45 Copper Transceiver Module

Cisco GLC-FE-T-I Compatible Industrial 125Mbps SFP 100BASE-TX 100m CAT6/CAT6a RJ45 Copper Transceiver Module

Cisco GLC-FE-T-I compatible copper transceiver is an industrial single channel 125Mbps Small Form-factor Pluggable SFP module for use in 100BASE Ethernet network. SFP FE-TX provides 125Mb/s throughput up to 100 meters over CAT5e/CAT6 twisted network cable. This transceiver is fully compliant with SFP Multi-Source Agreement (MSA), IEEE 802.3u 100BASE-TX and SERDES standard. Its electrical interface is MSA compliant 20-pin edge type connector and the line-side interface is RJ45 connector. The full-duplex SFP transceiver offers high performance interconnection at 125Mbps data rate. Low power consumption (1W for 100m) suits various brands of hosts, widely used in data centers and enterprise networks. MSA memory map is accessible via 2-wire (TWI/I2C) interface. Our modules are factory pre-programmed for compatibility, perform alternatively to genuine Cisco GLC-FE-T-I transceivers.

Feature

• Equivalent to Cisco GLC-FE-T-I in function
• Hot pluggable SFP copper transceiver module
• Data rate up to 125Mbps
• Conversion between host-side 100BASE-X and line-side 100BASE-TX
• RJ45 connector
• Auto-sense MDI/MDIX and auto-negotiation
• Supports 100BASE-TX using 100m Cat 5e/6 cable
• MSA memory accessible via 2-wire interface
• Single 3.3V power supply voltage
• Low power consumption (typically 1W @ 125Mbps 100m)
• Ambient temperature range -40 to 85°C for industrial application
• Compliant with INF-8074i, SFF-8472
• Compliant with IEEE 802.3u 100BASE-TX
• Compliant with RoHS, REACH, CE, FCC standards

Application

• Fast Ethernet
• Enterprise
• Campus

Specification