Español
日本語
Allied Telesis AT-SP10BD40/I-13 Compatible Industrial 10Gbps BIDI SFP+ 10GBASE-BR40 TX1330nm/RX1270nm 40km SMF Simplex LC DDM/DOM Optical Transceiver Module
$59.0
Compatible Brand
Generic Allied Telesis Cisco Juniper Networks Planet
Allied Telesis Compatible 10G BIDI SFP+ Industrial Transceiver Module Series
AT-SP10BD10/I-12 : 10km AT-SP10BD10/I-13 : 10km AT-SP10BD40/I-12 : 40km AT-SP10BD40/I-13 : 40km AT-SP10BD80/I-14 : 80km AT-SP10BD80/I-15 : 80km
BIDI transceiver module must be used in pair with its counterpart module
AT-SP10BD40/I-12 :Fiber patch cord for direct connection between transceiver modules
Simplex LC Single Mode OS2 Fiber Patch CordAllied Telesis AT-SP10BD40/I-13 Compatible Industrial 10Gbps BIDI SFP+ 10GBASE-BR40 TX1330nm/RX1270nm 40km SMF Simplex LC DDM/DOM Optical Transceiver Module
Allied Telesis AT-SP10BD40/I-13 compatible optical transceiver is an industrial single fiber bidirection 10Gbps Small Form-factor Pluggable SFP+ BIDI module for use in 10GBASE Ethernet network. SFP+ BR40D-3327 provides 10.31Gb/s throughput up to 40km over single-mode fiber (SMF) using 1330nm in transmitter side and 1270nm in receiver side. This transceiver is fully compliant with SFP+ Multi-Source Agreement (MSA), IEEE 802.3 10GBASE-BR40 and SFI standard. Its electrical interface is MSA compliant 20-pin edge type connector and the optical interface is Simplex LC connector. The full-duplex SFP+ transceiver features highly reliable DFB transmitter and PIN photo detector to offer high performance interconnection at 10.3125Gbps data rate. Industrial modules extend the operating temperature range. Built-in Digital Diagnostic Monitoring/Digital Optical Monitoring (DDM/DOM) support is present for real-time performance monitoring via 2-wire (TWI/I2C) interface. Our modules are factory pre-programmed for compatibility, perform alternatively to genuine Allied Telesis AT-SP10BD40/I-13 transceivers.
Feature
- Equivalent to Allied Telesis AT-SP10BD40/I-13 in function
- Hot pluggable SFP+ fiber optic transceiver module
- Data rate up to 10.3125Gbps
- TX1330nm/RX1270nm DFB transmitter
- PIN photo receiver
- Simplex LC optical connector
- Link distance up to SMF 40km
- Built-in digital diagnostic via 2-wire interface
- Single 3.3V power supply voltage
- Power consumption < 1.5W
- Ambient temperature range -40 to 85°C for industrial application
- Compliant with SFF-8431, SFF-8432, SFF-8419, SFF-8472
- Compliant with IEEE 802.3 10GBASE-BR40
- Compliant with RoHS, REACH, CE, FCC standards
Application
- 10G Ethernet
- 10G Fibre Channel over Ethernet
- 10G SONET/SDH
- Enterprise
- Campus
- 10G CPRI
- Data Center
Specification
| Allied Telesis Compatible P/N | AT-SP10BD40/I-13 | Form Factor | SFP+ |
| Max Data Rate | 10.3125Gbps | Max Distance | 40km (24.9 miles) |
| Wavelength | TX1330nm/RX1270nm | Connector | Simplex LC |
| DDM/DOM | Support | Media | SMF |
| Transmitter Type | DFB | Receiver Type | PIN |
| Transmitter Power | 1 to 5dBm | Receiver Sensitivity | < -15dBm |
| Extinction Ratio | 3.5dB | Receiver Overload | 0.5dBm |
| Transmit and Dispersion Penalty | 3.2dB | Power Budget | 16dB |
| OE Packaging | Coaxial Packaging | Modulation Format | NRZ |
| Power Consumption | 1.5W | Industrial Temperature Range | -40 to 85°C (-40 to 185°F) |
| Weight | 0.03 kg |
|---|---|
| Dimensions | 12.5 × 7 × 3.5 cm |
