Español
日本語
D-Link DEM-Q28X01Q-PIR4 Compatible 100Gbps QSFP28 100GBASE-PSM4 1310nm 500m SMF MTP/MPO-12 APC DDM/DOM Optical Transceiver Module
$179.0
Compatible Brand
Generic Allied Telesis Arista Networks Broadcom Avago Brocade Check Point Chelsio Ciena Cisco Dell Networking D-Link Edgecore Networks Extreme Networks F5 Networks Fortinet Gigamon H3C HPE Composable Huawei Intel Ixia Juniper Networks MikroTik MRV Nvidia Mellanox Palo Alto Networks
D-Link Compatible 100G QSFP28 Transceiver Module Series
DEM-Q2801Q-SR4 : 100m DEM-Q28X01Q-PIR4 : 500m DEM-Q28X02Q-IR4 : 2km DEM-Q28X10Q-4WDM : 10km DEM-Q2810Q-LR4 : 10km DEM-Q28X40Q-ER4 : 40km
Fiber patch cord for direct connection between transceiver modules
MPO 12-fiber Single Mode OS2 Fiber Patch CordD-Link DEM-Q28X01Q-PIR4 Compatible 100Gbps QSFP28 100GBASE-PSM4 1310nm 500m SMF MTP/MPO-12 APC DDM/DOM Optical Transceiver Module
D-Link DEM-Q28X01Q-PIR4 compatible optical transceiver is a parallel 100Gbps Quad Small Form-factor Pluggable QSFP28 module for use in 100GBASE Ethernet network. QSFP28 PSM4 provides 103.1Gb/s throughput up to 500 meters over single-mode fiber (SMF) with host FEC using 1310nm wavelength. This transceiver is fully compliant with QSFP28 Multi-Source Agreement (MSA), IEEE 802.3 100GBASE-PSM4 and CAUI-4 standard. Its electrical interface is MSA compliant 38-pin edge type connector and the optical interface is MTP/MPO-12 APC connector. The full-duplex QSFP28 transceiver implements 4 independent 25.78125Gbps transmit and receive signal channels in each fiber for an aggregate 103.125Gbps data rate. Built-in Digital Diagnostic Monitoring/Digital Optical Monitoring (DDM/DOM) support is present for real-time performance monitoring via 2-wire (TWI/I2C) interface. Our modules are factory pre-programmed for compatibility, perform alternatively to genuine D-Link DEM-Q28X01Q-PIR4 transceivers.
Feature
- Equivalent to D-Link DEM-Q28X01Q-PIR4 in function
- Hot pluggable QSFP28 fiber optic transceiver module
- Aggregate data rate up to 103.125Gbps
- 4 channels 1310nm DML transmitter
- 4 channels PIN photo receiver
- MTP/MPO-12 APC optical connector
- Link distance up to SMF 500m with host FEC
- 4x 25.78125Gbps NRZ retimed CAUI-4 electrical interface
- Built-in digital diagnostic via 2-wire interface
- Single 3.3V power supply voltage
- Power consumption < 3.5W
- Ambient temperature range 0 to 70°C for commercial application
- Compliant with SFF-8665, SFF-8661, SFF-8679, SFF-8636
- Compliant with IEEE 802.3 100GBASE-PSM4
- Compliant with RoHS, REACH, CE, FCC standards
Application
- 100G Ethernet
- Data Center
Specification
| D-Link Compatible P/N | DEM-Q28X01Q-PIR4 | Form Factor | QSFP28 |
| Max Data Rate | 103.125Gbps | Max Distance | 500m (1640ft) |
| Wavelength | 1310nm | Connector | MTP/MPO-12 APC |
| DDM/DOM | Support | Media | SMF |
| Transmitter Type | 4x DML | Receiver Type | PIN |
| Transmitter Power | -9.4 to 2dBm | Receiver Sensitivity | < -12.6dBm |
| Extinction Ratio | 3.5dB | Receiver Overload | 3.5dBm |
| Transmit and Dispersion Penalty | 2.9dB | Power Budget | 3.2dB |
| OE Packaging | COB Packaging | Signal Conditioner | Retimer for TX and RX |
| Modulation Format | NRZ | Host FEC | Support |
| Power Consumption | 3.5W | Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Weight | 0.04 kg |
|---|---|
| Dimensions | 12.5 × 7 × 3.5 cm |
