Español
日本語
Advantech SFP-10GTX Compatible 10Gbps SFP+ 10GBASE-T 30m CAT6a/CAT7 RJ45 Copper Transceiver Module
$44.0
Compatible Brand
Generic Advantech Alcatel-Lucent Allied Telesis Arista Networks Avaya Nortel Brocade Check Point Cisco Commscope Ruckus Dell Force10 Dell Networking D-Link Edgecore Networks Extreme Networks Fortinet Gigamon H3C HPE Aruba HPE BladeSystem HPE Composable HPE Storage Huawei IBM IBM BNT Intel Juniper Networks MikroTik Netgear Nvidia Mellanox Palo Alto Networks Planet Spirent TP-Link TRENDnet Ubiquiti
Advantech Compatible 10G SFP+ Transceiver Module Series
SFP-10GTX : 30m SFP-XMM-33 : 100m SFP-XMM-LC-400 : 300m SFP-XSM-LC-10K : 10km SFP-XSM-LC-20K : 20km SFP-XSM-LC-40K : 40km SFP-XSM-LC-80K : 80km
Advantech SFP-10GTX Compatible 10Gbps SFP+ 10GBASE-T 30m CAT6a/CAT7 RJ45 Copper Transceiver Module
Advantech SFP-10GTX compatible copper transceiver is a single channel 10Gbps Small Form-factor Pluggable SFP+ module for use in 10GBASE Ethernet network. SFP+ 10G-T provides 10.31Gb/s throughput up to 30 meters over CAT6a/CAT7 twisted network cable. This transceiver is fully compliant with SFP+ Multi-Source Agreement (MSA), IEEE 802.3an 10GBASE-T and SFI standard. Its electrical interface is MSA compliant 20-pin edge type connector and the line-side interface is RJ45 connector. The full-duplex SFP+ transceiver offers high performance interconnection at 10.3125Gbps data rate. It is also backward compatible with 10M/100M/1000M/2.5G/5GBASE-T applications. Low power consumption (2.3W for 30m) suits various brands of hosts, widely used in data centers and enterprise networks. MSA memory map is accessible via 2-wire (TWI/I2C) interface. Our modules are factory pre-programmed for compatibility, perform alternatively to genuine Advantech SFP-10GTX transceivers.
Feature
- Equivalent to Advantech SFP-10GTX in function
- Hot pluggable SFP+ copper transceiver module
- Data rate up to 10.3125Gbps
- Conversion between host-side 10GBASE-R and line-side 10GBSAE-T
- Backward compatible with 1000BASE-T/2.5GBASE-T/5GBASE-T
- RJ45 connector
- Auto-sense MDI/MDIX and auto-negotiation
- Supports 10GBASE-T using 30m Cat 6a/7 cable
- Supports 5GBASE-T using 70m Cat 5e cable
- Supports 2.5GBASE-T using 100m Cat 5e cable
- Supports 1000BASE-T using 100m Cat 5e cable
- MSA memory accessible via 2-wire interface
- Single 3.3V power supply voltage
- Low power consumption (typically 2.3W @ 10Gbps 30m)
- Ambient temperature range 0 to 70°C for commercial application
- Compliant with SFF-8431, SFF-8432, SFF-8419, SFF-8472
- Compliant with IEEE 802.3an 10GBASE-T
- Compliant with IEEE 802.3bx 5GBASE-T/2.5GBASE-T
- Compliant with IEEE 802.3ab 1000BASE-T
- Compliant with RoHS, REACH, CE, FCC standards
Application
- 10G Ethernet
- 10G Fibre Channel over Ethernet
- 10G SONET/SDH
- Enterprise
- Campus
- 10G CPRI
- Data Center
Specification
| Advantech Compatible P/N | SFP-10GTX | Form Factor | SFP+ |
| Max Data Rate | 10.3125Gbps | Max Distance | 30m (98ft) |
| Connector | RJ45 | Media | CAT6a/CAT7 |
| Modulation Format | PAM16 | DDM/DOM | Not support |
| Power Consumption | 2.3W | Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Weight | 0.03 kg |
|---|---|
| Dimensions | 12.5 × 7 × 3.5 cm |
