Intel SPTSLP2SLCDF Compatible Single Lambda 100Gbps PAM4 QSFP28 100GBASE-DR 1310nm 500m SMF Duplex LC DDM/DOM Optical Transceiver Module
Intel SPTSLP2SLCDF compatible optical transceiver is a Single Lambda 100Gbps Quad Small Form-factor Pluggable QSFP28 module for use in 100GBASE Ethernet network. QSFP28 DR provides 106.2Gb/s throughput up to 500 meters over single-mode fiber (SMF) with built-in FEC using 1310nm wavelength. This transceiver is fully compliant with QSFP28 Multi-Source Agreement (MSA), 100G Lambda MSA, IEEE 802.3cd 100GBASE-DR and CAUI-4 standard. Its electrical interface is MSA compliant 38-pin edge type connector and the optical interface is Duplex LC connector. The full-duplex QSFP28 transceiver implements 106.26Gbps PAM4 transmit and receive signal channel by single light source. Built-in Digital Diagnostic Monitoring/Digital Optical Monitoring (DDM/DOM) support is present for real-time performance monitoring via 2-wire (TWI/I2C) interface. Our modules are factory pre-programmed for compatibility, perform alternatively to genuine Intel SPTSLP2SLCDF transceivers.
Feature
- Equivalent to Intel SPTSLP2SLCDF in function
- Hot pluggable QSFP28 fiber optic transceiver module
- Aggregate data rate up to 106.26Gbps
- 1310nm EML transmitter
- PIN photo receiver
- Duplex LC optical connector
- Link distance up to SMF 500m with host FEC
- 4x 25.78125Gbps PAM4 retimed CAUI-4 electrical interface
- Single 53.125Gbaud PAM4 optical signal
- Built-in digital diagnostic via 2-wire interface
- Single 3.3V power supply voltage
- Power consumption < 4.5W
- Ambient temperature range 0 to 70°C for commercial application
- Compliant with 100G Lambda MSA, SFF-8665, SFF-8661, SFF-8679, SFF-8636
- Compliant with IEEE 802.3cd 100GBASE-DR
- Compliant with RoHS, REACH, CE, FCC standards
Application
- 100G Ethernet
- Data Center
Specification
Intel Compatible P/N | SPTSLP2SLCDF | Form Factor | QSFP28 |
Max Data Rate | 106.26Gbps | Max Distance | 500m (1640ft) |
Wavelength | 1310nm | Connector | Duplex LC |
DDM/DOM | Support | Media | SMF |
Transmitter Type | EML | Receiver Type | PIN |
Transmitter Power | -2.4 to 4dBm | Receiver Sensitivity | < -4.5dBm |
Transmit and Dispersion Penalty | 3.4dB | Extinction Ratio | 3.5dB |
Power Budget | 2.1dB | Signal Conditioner | DSP for TX and RX |
Modulation Format | PAM4 | Host FEC | Support |
Power Consumption | 4.5W | Commercial Temperature Range | 0 to 70°C (32 to 158°F) |