Generic SFP-10G-LB Compatible 10Gbps SFP+ 0W 0dB Passive Loopback Testing Module
Dawnray’s SFP-10G-LB is a 10Gbps Small Form-factor Pluggable SFP+ loopback module for cost effective 10GBASE Ethernet network port testing. SFP+ LB routes 10.31Gb/s data stream from transmitting side back to receiving side of the same host port by looping back the electrical signal. This loopback is fully compliant with SFP+ Multi-Source Agreement (MSA), IEEE 802.3ae 10GBASE-CR and SFI standard. The electrical interface is MSA compliant 20-pin edge type connector and the internal loopback by AC coupling internally. The SFP+ loopback module implements transmit and receive differential signal for 10.3125Gbps data rate. MSA memory map is accessible via 2-wire (TWI/I2C) interface. Our loopback is designed for R&D evaluation, production testing of SFP+ equipped network routers/switches, blade servers and adapter cards. Protocol-transparent design ensures widely compatibility with various signal standards, including including 10 Gigabit Ethernet (10GbE), 8G/4G Fibre Channel and proprietary interconnection.
Feature
- Hot pluggable SFP+ loopback testing module
- Data rate up to 10.3125Gbps
- 10.3125Gbps NRZ SFI electrical interface
- MSA memory accessible via 2-wire interface
- Single 3.3V power supply voltage
- Extremely low power consumption near 0W
- Ambient temperature range -20 to 85°C for extended application
- Compliant with SFF-8431, SFF-8432, SFF-8419, SFF-8472
- Compliant with IEEE 802.3ae 10GBASE-CR
- Compliant with RoHS, REACH, CE, FCC standards
Application
- 10G Ethernet
- Board Level System Testing
- 56G 4X FDR InfiniBand
Specification
Part Number | SFP-10G-LB | Form Factor | SFP+ |
Max Data Rate | 10.3125Gbps | DDM/DOM | Not support |
Signal Conditioner | None | Attenuation | 0dB |
Extended Temperature Range | -20 to 85°C (-4 to 185°F) | Power Consumption | 0W |