Filter

Generic QSFP-112G-ER4 Compatible 100Gbps QSFP28 100GBASE-ER4 1310nm 40km SMF Duplex LC DDM/DOM Optical Transceiver Module

Generic QSFP-112G-ER4 Compatible 100Gbps QSFP28 100GBASE-ER4 1310nm 40km SMF Duplex LC DDM/DOM Optical Transceiver Module

$1,499.0

Quantity	Discount (%)	USD
1 - 9	—	$1,499.0
10 - 19	1.78 %	$1,472.3
20 - 49	3.56 %	$1,445.6
50 - 99	5.91 %	$1,410.4
100 - 199	7.69 %	$1,383.7
200 - 499	9.47 %	$1,357.0
500 - 999	11.82 %	$1,321.8
1,000 - 1,999	13.6 %	$1,295.1
2,000 - 4,999	15.38 %	$1,268.4
5,000 - 9,999	17.73 %	$1,233.2
10,000+	19.51 %	$1,206.5

SKU: QSFP-112G-ER4 Categories: 100G, Generic Compatible, Interconnection, QSFP28, Transceiver

Description
Additional information

Generic QSFP-112G-ER4 Compatible 100Gbps QSFP28 100GBASE-ER4 1310nm 40km SMF Duplex LC DDM/DOM Optical Transceiver Module

Dawnray’s QSFP-112G-ER4 optical transceiver is a parallel 100Gbps Quad Small Form-factor Pluggable QSFP28 module for use in OTU4 OTN network. QSFP28 ER4 provides 112Gb/s throughput up to 25km-40km over single-mode fiber (SMF) with host FEC using 1295.56nm, 1300.05nm, 1304.58nm, 1309.14nm wavelength. This transceiver is fully compliant with QSFP28 Multi-Source Agreement (MSA), IEEE 802.3ba 100GBASE-ER4 and CAUI-4 standard. Its electrical interface is MSA compliant 38-pin edge type connector and the optical interface is Duplex LC connector. The full-duplex QSFP28 transceiver implements 4 independent 28Gbps transmit and receive signal channels in each wavelength for an aggregate 112Gbps data rate. Built-in Digital Diagnostic Monitoring/Digital Optical Monitoring (DDM/DOM) support is present for real-time performance monitoring via 2-wire (TWI/I2C) interface. Our modules are factory pre-programmed for compatibility, perform alternatively to generic/MSA transceivers.

Feature

Hot pluggable QSFP28 fiber optic transceiver module
Aggregate data rate up to 112Gbps
4 channels 1310nm LAN-WDM EML transmitter
4 channels APD photo receiver
Duplex LC optical connector
Link distance up to SMF 40km with host FEC
4x 28Gbps NRZ retimed CAUI-4 electrical interface
Built-in digital diagnostic via 2-wire interface
Single 3.3V power supply voltage
Power consumption < 4.5W
Ambient temperature range 0 to 70°C for commercial application
Compliant with SFF-8665, SFF-8661, SFF-8679, SFF-8636
Compliant with IEEE 802.3ba 100GBASE-ER4
Compliant with RoHS, REACH, CE, FCC standards

Application

100G Ethernet
OTN G.709 OTU4
Data Center

Specification

Part Number	QSFP-112G-ER4	Form Factor	QSFP28
Max Data Rate	112Gbps	Max Distance	25km-40km (15.5 miles-24.9 miles)
Wavelength	1295.56nm, 1300.05nm, 1304.58nm, 1309.14nm	Connector	Duplex LC
DDM/DOM	Support	Media	SMF
Transmitter Type	4x LAN-WDM EML	Receiver Type	APD
Transmitter Power	-2.5 to 2.9dBm	Receiver Sensitivity	< -19dBm
Extinction Ratio	4dB	Receiver Overload	3.3dBm
Transmit and Dispersion Penalty	2.5dB	Power Budget	14dB
OE Packaging	Box Packaging	Signal Conditioner	Retimer for TX and RX
Modulation Format	NRZ	Host FEC	Support
Power Consumption	4.5W	Commercial Temperature Range	0 to 70°C (32 to 158°F)