0.5m (1.64ft) Generic Q4S-25G-DAC30-0M5 Compatible QSFP28 to 4 SFP28 DAC 25GBASE-CR 4x 25Gbps Passive Direct Attach Twinax Breakout Copper Cable

0.5m (1.64ft) Generic Q4S-25G-DAC30-0M5 Compatible QSFP28 to 4 SFP28 DAC 25GBASE-CR 4x 25Gbps Passive Direct Attach Twinax Breakout Copper Cable

Dawnray’s Q4S-25G-DAC30-0M5 DAC is a passive 4x 25Gbps QSFP28 to 4 SFP28 direct attach breakout cable for use in 25GBASE Ethernet network. QSFP28 breakout DAC provides 4x 25.78Gb/s throughput for 0.5m interconnection with high speed twin-axial copper cable. This DAC is fully compliant with QSFP28/SFP28 Multi-Source Agreement (MSA), IEEE 802.3by 25GBASE-CR and 25GAUI standard. Its twin-axial copper cable’s wire gauge is 30AWG and pre-terminated with MSA compliant 38/20-pin edge type connectors. The breakout DAC cable splits 4 branches of 25Gbps NRZ signals from QSFP28 into SFP28. Standard length options cover from 0.5 meters to 5 meters. MSA memory map is accessible via 2-wire (TWI/I2C) interface. Our breakout DACs are factory pre-programmed for compatibility, perform alternatively to generic/MSA direct attach cables.

Feature

• Hot pluggable QSFP28 to 4 SFP28 DAC breakout direct attach cable
• Split 100Gbps into 4 branches of 25Gbps
• Pre-terminated 30AWG twin-axial copper cable
• 25.78125Gbps NRZ 25GAUI electrical interface
• Minimum bending radius 25mm
• MSA memory accessible via 2-wire interface
• Single 3.3V power supply voltage
• Extremely low power consumption near 0W
• Ambient temperature range 0 to 70°C for commercial application
• Compliant with SFF-8665, SFF-8661, SFF-8679, SFF-8636, SFF-8402, SFF-8432, SFF-8419, SFF-8472
• Compliant with IEEE 802.3by 25GBASE-CR
• Compliant with RoHS, REACH, CE, FCC standards

Application

• 25G Ethernet
• Data Center

Specification