Juniper Networks SFP28-25G-BX-U Compatible 25Gbps BIDI SFP28 25GBASE-BR10 TX1270nm/RX1330nm 10km SMF Simplex LC DDM/DOM Optical Transceiver Module

$79.0

Quantity	Discount (%)	USD
1 - 9	—	$79.0
10 - 19	3.04 %	$76.6
20 - 49	6.08 %	$74.2
50 - 99	10.13 %	$71.0
100 - 199	13.16 %	$68.6
200 - 499	16.2 %	$66.2
500 - 999	20.25 %	$63.0
1,000 - 1,999	23.29 %	$60.6
2,000 - 4,999	26.33 %	$58.2
5,000 - 9,999	30.38 %	$55.0
10,000+	33.42 %	$52.6

SKU: JUNIPER-NETWORKS-SFP28-25G-BX-U Categories: 25G, BIDI SFP28, Interconnection, Juniper Networks Compatible, Transceiver

Description
Additional information

Juniper Networks SFP28-25G-BX-U Compatible 25Gbps BIDI SFP28 25GBASE-BR10 TX1270nm/RX1330nm 10km SMF Simplex LC DDM/DOM Optical Transceiver Module

Juniper Networks SFP28-25G-BX-U compatible optical transceiver is a single fiber bidirection 25Gbps Small Form-factor Pluggable SFP28 BIDI module for use in 25GBASE Ethernet network. SFP28 BR10U-2733 provides 25.78Gb/s throughput up to 10km over single-mode fiber (SMF) with host FEC using 1270nm in transmitter side and 1330nm in receiver side. This transceiver is fully compliant with SFP28 Multi-Source Agreement (MSA), IEEE 802.3 25GBASE-BR10 and 25GAUI standard. Its electrical interface is MSA compliant 20-pin edge type connector and the optical interface is Simplex LC connector. The full-duplex SFP28 transceiver features highly reliable DML transmitter and PIN photo detector to offer high performance interconnection at 25.78125Gbps data rate. Built-in Digital Diagnostic Monitoring/Digital Optical Monitoring (DDM/DOM) support is present for real-time performance monitoring via 2-wire (TWI/I2C) interface. Our modules are factory pre-programmed for compatibility, perform alternatively to genuine Juniper Networks SFP28-25G-BX-U transceivers.

Feature

Equivalent to Juniper Networks SFP28-25G-BX-U in function
Hot pluggable SFP28 fiber optic transceiver module
Data rate up to 25.78125Gbps
TX1270nm/RX1330nm DML transmitter
PIN photo receiver
Simplex LC optical connector
Link distance up to SMF 10km with host FEC
Internal CDR on both Transmitter and Receiver channels
Built-in digital diagnostic via 2-wire interface
Single 3.3V power supply voltage
Power consumption < 1.2W
Ambient temperature range 0 to 70°C for commercial application
Compliant with SFF-8402, SFF-8432, SFF-8419, SFF-8472
Compliant with IEEE 802.3 25GBASE-BR10
Compliant with RoHS, REACH, CE, FCC standards

Application

25G Ethernet
eCPRI Wireless Networks
Enterprise
Campus
Data Center

Specification

Juniper Networks Compatible P/N	SFP28-25G-BX-U	Form Factor	SFP28
Max Data Rate	25.78125Gbps	Max Distance	10km (6.2 miles)
Wavelength	TX1270nm/RX1330nm	Connector	Simplex LC
DDM/DOM	Support	Media	SMF
Transmitter Type	DML	Receiver Type	PIN
Transmitter Power	-2 to 4dBm	Receiver Sensitivity	< -13dBm
Extinction Ratio	3.5dB	Receiver Overload	2dBm
Transmit and Dispersion Penalty	3dB	Power Budget	11dB
OE Packaging	Coaxial Packaging	Signal Conditioner	Retimer for TX and RX
Modulation Format	NRZ	Host FEC	Support
Power Consumption	1.2W	Commercial Temperature Range	0 to 70°C (32 to 158°F)