Español
日本語
Intel E25GSFP28SR Compatible Dual Rate 10/25Gbps SFP28 10GBASE-SR/25GBASE-SR 850nm 100m MMF Duplex LC DDM/DOM Optical Transceiver Module
$24.9
Compatible Brand
Generic Arista Networks Broadcom Avago Cisco Extreme Networks Huawei Intel Ixia
Intel Compatible 25G SFP28 Transceiver Module Series
E25GSFP28SR : 100mFiber patch cord for direct connection between transceiver modules
Duplex LC Multi Mode OM4 Fiber Patch CordIntel E25GSFP28SR Compatible Dual Rate 10/25Gbps SFP28 10GBASE-SR/25GBASE-SR 850nm 100m MMF Duplex LC DDM/DOM Optical Transceiver Module
Intel E25GSFP28SR compatible optical transceiver is a dual fiber 10/25Gbps Small Form-factor Pluggable SFP28 module for use in 25GBASE Ethernet network. SFP28 10/25G-SR provides 10.31/25.78Gb/s throughput up to 100 meters over OM4 or 70 meters over OM3 multi-mode fiber (MMF) with host FEC using 850nm wavelength. This transceiver is fully compliant with SFP28 Multi-Source Agreement (MSA), IEEE 802.3ae/802.3by 10GBASE-SR/25GBASE-SR and 25GAUI standard. Its electrical interface is MSA compliant 20-pin edge type connector and the optical interface is Duplex LC connector. The full-duplex SFP28 transceiver features highly reliable VCSEL transmitter and PIN photo detector to offer high performance interconnection at 10.3125/25.78125Gbps data rate. Built-in Digital Diagnostic Monitoring/Digital Optical Monitoring (DDM/DOM) support is present for real-time performance monitoring via 2-wire (TWI/I2C) interface. Our modules are factory pre-programmed for compatibility, perform alternatively to genuine Intel E25GSFP28SR transceivers.
Feature
- Equivalent to Intel E25GSFP28SR in function
- Hot pluggable SFP28 fiber optic transceiver module
- Dual data rate 10.3125/25.78125Gbps
- 850nm VCSEL transmitter
- PIN photo receiver
- Duplex LC optical connector
- Link distance up to OM4 100m, OM3 70m with host FEC
- Internal CDR on both Transmitter and Receiver channels
- Built-in digital diagnostic via 2-wire interface
- Single 3.3V power supply voltage
- Power consumption < 1W
- Ambient temperature range 0 to 70°C for commercial application
- Compliant with SFF-8402, SFF-8432, SFF-8419, SFF-8472
- Compliant with IEEE 802.3by 25GBASE-SR
- Compliant with IEEE 802.3ae 10GBASE-SR
- Compliant with RoHS, REACH, CE, FCC standards
Application
- 25G Ethernet
- eCPRI Wireless Networks
- Enterprise
- Campus
- Data Center
Specification
| Intel Compatible P/N | E25GSFP28SR | Form Factor | SFP28 |
| Max Data Rate | 10.3125/25.78125Gbps | Max Distance | 100m (328ft) @OM4, 70m (230ft) @OM3 |
| Wavelength | 850nm | Connector | Duplex LC |
| DDM/DOM | Support | Media | MMF |
| Transmitter Type | VCSEL | Receiver Type | PIN |
| Transmitter Power | -5 to 2.4dBm | Receiver Sensitivity | < -10.3dBm |
| Extinction Ratio | 2dB | Receiver Overload | 2.4dBm |
| Transmit and Dispersion Penalty | 3dB | Power Budget | 5.3dB |
| OE Packaging | Coaxial Packaging | Signal Conditioner | Retimer for TX and RX |
| Modulation Format | NRZ | Host FEC | Support |
| Power Consumption | 1W | Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Weight | 0.03 kg |
|---|---|
| Dimensions | 12.5 × 7 × 3.5 cm |
