2m (6.56ft) Arista Networks C-Q200-Q200-2M Compatible PAM4 QSFP56 to QSFP56 DAC 200GBASE-CR4 200Gbps Passive Direct Attach Twinax Copper Cable

2m (6.56ft) Arista Networks C-Q200-Q200-2M Compatible PAM4 QSFP56 to QSFP56 DAC 200GBASE-CR4 200Gbps Passive Direct Attach Twinax Copper Cable

Arista Networks C-Q200-Q200-2M compatible DAC is a passive 200Gbps QSFP56 to QSFP56 direct attach cable for use in 200GBASE Ethernet network. QSFP56 DAC provides 212.5Gb/s throughput for 2m interconnection with high speed twin-axial copper cable. This DAC is fully compliant with QSFP56 Multi-Source Agreement (MSA), IEEE 802.3cd 200GBASE-CR4 and 200GAUI-4 standard. Its twin-axial copper cable’s wire gauge is 28AWG and pre-terminated with MSA compliant 38-pin edge type connectors. The DAC cable implements 4 independent 53.125Gbps PAM4 transmit and receive signal channels in each differential pair for an aggregate 212.5Gbps data rate. It also supports 4 channels 25.78125Gbps NRZ signals for 103.125Gbps interconnection. Standard length options cover from 0.5 meters to 3 meters. MSA memory map is accessible via 2-wire (TWI/I2C) interface. Our DACs are factory pre-programmed for compatibility, perform alternatively to genuine Arista Networks C-Q200-Q200-2M direct attach cables.

Feature

• Equivalent to Arista Networks C-Q200-Q200-2M in function
• Hot pluggable QSFP56 to QSFP56 DAC direct attach cable
• Aggregate data rate up to 212.5Gbps
• Pre-terminated 28AWG twin-axial copper cable
• 4x 53.125Gbps PAM4 200GAUI-4 electrical interface
• Minimum bending radius 35mm
• MSA memory accessible via 2-wire interface
• Single 3.3V power supply voltage
• Extremely low power consumption near 0W
• Ambient temperature range 0 to 70°C for commercial application
• Compliant with SFF-8665, SFF-8661, SFF-8679, SFF-8636
• Compliant with IEEE 802.3cd 200GBASE-CR4
• Compliant with RoHS, REACH, CE, FCC standards

Application

• 200G Ethernet
• Data Center

Specification