Dell Networking CFP2-100GBASE-LR4 Compatible 100Gbps CFP2 100GBASE-LR4 1310nm 10km SMF Duplex LC DDM/DOM Optical Transceiver Module

$2,799.0

Quantity	Discount (%)	USD
1 - 9	—	$2,799.0
10 - 19	0.84 %	$2,775.6
20 - 49	1.67 %	$2,752.2
50 - 99	2.78 %	$2,721.3
100 - 199	3.61 %	$2,697.9
200 - 499	4.45 %	$2,674.5
500 - 999	5.55 %	$2,643.6
1,000 - 1,999	6.39 %	$2,620.2
2,000 - 4,999	7.22 %	$2,596.8
5,000 - 9,999	8.33 %	$2,565.9
10,000+	9.16 %	$2,542.5

SKU: DELL-NETWORKING-CFP2-100GBASE-LR4 Categories: 100G, CFP/CFP2/CFP4, Dell Networking Compatible, Interconnection, Transceiver

Description
Additional information

Dell Networking CFP2-100GBASE-LR4 Compatible 100Gbps CFP2 100GBASE-LR4 1310nm 10km SMF Duplex LC DDM/DOM Optical Transceiver Module

Dell Networking CFP2-100GBASE-LR4 compatible optical transceiver is a parallel 100Gbps C Form-factor Pluggable CFP2 module for use in OTU4 OTN network. CFP2 LR4 provides 112Gb/s throughput up to 10km over single-mode fiber (SMF) with built-in FEC using 1295.56nm, 1300.05nm, 1304.58nm, 1309.14nm wavelength. This transceiver is fully compliant with CFP2 Multi-Source Agreement (MSA), IEEE 802.3ba 100GBASE-LR4 and CAUI-4 standard. Its electrical interface is MSA compliant 104-pin edge type connector and the optical interface is Duplex LC connector. The full-duplex CFP2 transceiver implements 4 independent 28Gbps transmit and receive signal channels in each wavelength for an aggregate 112Gbps data rate. Built-in Digital Diagnostic Monitoring/Digital Optical Monitoring (DDM/DOM) support is present for real-time performance monitoring via MDIO interface. Our modules are factory pre-programmed for compatibility, perform alternatively to genuine Dell Networking CFP2-100GBASE-LR4 transceivers.

Feature

Equivalent to Dell Networking CFP2-100GBASE-LR4 in function
Hot pluggable CFP2 fiber optic transceiver module
Aggregate data rate up to 112Gbps
4 channels 1310nm LAN-WDM DML transmitter
4 channels PIN photo receiver
Duplex LC optical connector
Link distance up to SMF 10km with module embedded FEC
4x 28Gbps NRZ retimed CAUI-4 electrical interface
Built-in digital diagnostic via MDIO interface
Single 3.3V power supply voltage
Power consumption < 6W
Ambient temperature range 0 to 70°C for commercial application
Compliant with CFP2 MSA
Compliant with IEEE 802.3ba 100GBASE-LR4
Compliant with RoHS, REACH, CE, FCC standards

Application

100G Ethernet
OTN G.709 OTU4
Data Center

Specification

Dell Networking Compatible P/N	CFP2-100GBASE-LR4	Form Factor	CFP2
Max Data Rate	112Gbps	Max Distance	10km (6.2 miles)
Wavelength	1295.56nm, 1300.05nm, 1304.58nm, 1309.14nm	Connector	Duplex LC
DDM/DOM	Support	Media	SMF
Transmitter Type	4x LAN-WDM DML	Receiver Type	PIN
Transmitter Power	-4.3 to 4.5dBm	Receiver Sensitivity	< -10.6dBm
Extinction Ratio	4dB	Receiver Overload	5.5dBm
Transmit and Dispersion Penalty	2.2dB	Power Budget	6.3dB
Optical Signal	4x25G	Electric Signal	4x25G
Power Consumption	6W	Commercial Temperature Range	0 to 70°C (32 to 158°F)